M10 replacement plate Heat Exchanger for oil cooler HU600 series

M10 replacement Plate Heat Exchanger for Oil cooler HU600 series

1.Frame:Carbon steel,Stainless steel
2.Plates:AISI 304/316L,SMO254,Hastelloy,Ni,Ti 
3.Gasket:NBR/EPDM/VITON                        

                                                              HUGENAU Gasket Plate Heat Exchanger Series

Material Selection From

Applications 

General heating and cooling duties. Heating by means of steam.

Standard Design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids

between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Typical Capacities

Liquid flow rate

Up to 16 kg/s , depending on media, permitted

Pressure drop and temperature program.

Water heating by steam

300 to 800 kW

Working Principle

Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Particulars Required for Quotation

To enable Hugenau's representative to make a specific quotation, enquiries should be accompanied by the following particulars:

– Flow rates or heat load required

– Temperature program

– Physical properties of liquids in question (if not water)

– Desired working pressure

– Maximum permitted pressure drop

– Available Steam Pressure

Typical Application 

Food Industry: Milk pasteurization, Milk and beverage pasteurization , Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place) heating , Reverse osmosis water.

Marine Application: Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers’ cabins and freight spaces

Others: turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating

High quality

Reasonable price

Customer made

Know-how design and customer support

Top trustworthy manufacturer in china

Certified by ISO9001, ISO14001,CE, UL, CCS, etc.

Factory

Inspection and Quality Control

                       Welcome to visit our factory!